|
Scissor Gates by Criterion | Residential Gates
Scissor Gates
Folding Gates - also known as scissor, accordion, expanding, or collapsible gates - are available in the rugged double-channel construction of the DC Series, the performance-designed economy of the EG Series, and the commonly seen “lazy tong” design of the LT Series. Most gates can be either single sliding or bi-parting, and can roll on floor casters or in tracks. Gate Cabinets can be provided to secure and conceal the gates when not in use.
DC Series Gates are designed for maximum durability and security. Double steel channels are riveted together to form each vertical member and connected with double rows of steel lattice bars traveling on nylon bearings and washers to operate with a minimum of effort. Leading and trailing edges are steel box shaped sections. DC series gates can be manufactured to almost any size.
EG Series Gates are value engineered to offer a balance between security and economy. Vertical members are single steel channels, alternating with steel flat bars, and connected with single rows of steel lattice bars traveling on formed steel glides for carefree operation. EG series gates are commonly provided up to 30’ wide and 12’ high, but even larger sizes may be available for some models.
LT Series Gates are performance-designed to meet the needs of the most cost-conscious buyer. Quality construction is achieved by the use of diagonal steel lattice channels in a diamond pattern riveted together through nylon spacers for light weight and smooth operation. LT series Gates are normally limited to 26’ wide and 12’ high. They are also available in a fully portable version on rolling stands for temporary usage in adjustable widths and a typical 6’-6” extended height.
Gate Cabinets can be provided to secure and conceal gates when not in use. Recessed steel cabinets with lockable hinged doors are available in “deep” and “shallow” designs for varying installation conditions.
NOTE: Most gates can be either single sliding or bi-parting, and can roll on floor casters or in top or bottom tracks
Please Note -
For residential gate installation and service - please contact:
R&S of San Mateo County, Inc.
1540 Gilbreth Rd. Burlingame, CA 94010 phone (650) 552-0660 fax (650) 552-0664
Residential Gates
To create a system that best suits you or your customer's needs we will design in accordance to specific environmental conditions, safety concerns and security requirements that are unique to each application. You can be assured that your new system will provide you with years of reliable, low maintenance service as each gate is custom fabricated in our production facility to insure that materials and workmanship meet our standards of excellence.
Gate Style Examples | Operators | Horsepower Chart
Sliding and Swinging Vehicle Gate Styles
We specialize in arched gates and offer a wide variety of wrought iron fencing and hardware. A large selection of spear top designs, intermediate scroll designs, and alphabetical letters is available to choose from. A family crest can even be integrated into your gate with custom powder coat colors.
Most of our gate styles are available as slide or swing gates and all are constructed on 2"X 2" tubular steel frames, with 1"X 2" horizontal channels and 5/8" tubular steel pickets set 6" on center. The suffix "I" indicates a slide gate and "II" indicates a swing gate.
| |
Bay View I |
|
The Tides I |
< top of section
|
|
 |
Vine Yard II |
|
Vista II |
< top of section
|
|
|
Sierra I |
|
Monterey I |
< top of section
|
|
 |
Sea Side I |
|
Yosemite II |
< top of section
|
|
 |
If you don't see what you need here, please call. We are always happy to create a custom design.
Please Note -
For residential gate installation and service - please contact:
R&S of San Mateo County, Inc.
1540 Gilbreth Rd. Burlingame, CA 94010 phone (650) 552-0660 fax (650) 552-0664
Gate Operators
Once you decide on the gate, the next step is selecting the automatic gate operator that best suits the weight and the number of cycles it will be asked to perform per day. We carry Elite Access Systems Inc. gate operators with a model to suit your requirments: from low cycle home use gate operators to high traffic commercial gate operators. Elite Access Systems is part of The Chamberlain Group, Inc., the world´s largest manufacturer of residential and commercial door operators, access control products and gate operators. Chamberlain provides the broadest line of perimeter access control products for use in the residential, commercial and institutional markets.
Operator Models:
Miricale One | RoboSlide | RoboSwing R900 | CSW200UL | SL3000UL | Hercules |
Miricale One
|
|
RoboSlide
|
Electromechanical Linear Gate Operator
Linear mechanical, 24 volt DC gate operator. It uses a precise limit switch system that reduces stress and creates a consistantly smooth operation.
|
12V DC Residential Slide Gate Operator
Uses only a 12 volt, battery system that can be charged either through the solar panel or plug in transformer.
|
RoboSwing R900
|
|
CSW200UL
|
Residential Swing Gate Operator
Uses only a 12 volt, 7 amp hour battery that can be charged either through the solar panel or plug in transformer.
|
High Traffic Commercial Swing Gate Operator
Commercial Swing Gate operator for use in high traffic applications, our most popular swing gate operator.
|
SL3000UL
|
|
Hercules
|
High Traffic Commercial Slide Gate Operator
Commercial Slide Gate Operator (1/2 HP) for use in high traffic applications. Capable of continuous cycles daily.
|
|
Commercial Overhead Gate Operator
Designed for 8´ overhead gates, the smartest choice for low clearance high traffic underground parking garages.
|
Horsepower Selection Guide For Rolling Doors and Grilles:
Model |
HP |
Maximum Square Footage |
24 GA |
22 GA |
20 GA |
18 GA |
Insu-lated |
Steel Grille |
Alum. Grille |
Steel Counter Shutter |
Alum. Counter Shutter |
LH LJ |
1/2 |
190 |
165 |
150 |
-- |
-- |
180 |
250 |
165 |
210 |
SJ |
1/2 |
-- |
-- |
-- |
-- |
-- |
120 |
140 |
100 |
135 |
GJ |
1/2 |
135 |
125 |
120 |
-- |
-- |
135 |
160 |
125 |
140 |
H J |
1/3 |
210 |
190 |
175 |
130 |
100 |
210 |
265 |
190 |
220 |
1/2 |
275 |
250 |
225 |
170 |
130 |
260 |
350 |
250 |
|
3/4 |
340 |
310 |
290 |
215 |
165 |
340 |
450 |
|
|
MG |
1/2 |
290 |
260 |
240 |
190 |
150 |
280 |
400 |
|
|
3/4 |
370 |
320 |
300 |
240 |
180 |
375 |
550 |
|
|
1 |
440 |
360 |
340 |
270 |
200 |
480 |
640 |
|
|
11/2 |
-- |
460 |
430 |
360 |
260 |
620 |
|
|
|
2 |
-- |
-- |
560 |
480 |
350 |
|
|
|
|
3 |
-- |
-- |
840 |
700 |
520 |
|
|
|
|
5 |
-- |
-- |
1200 |
920 |
780 |
|
|
|
|
71/2 |
-- |
-- |
1500 |
1100 |
950 |
|
|
|
|
Notes:
(1) Use 24 GA limits for aluminum service door.
(2) GJ, SJ, and LJ operators not recommended for use on doors/grilles too large to be manually operated. (Use MG, H, or LH on doors requiring manual hoist chain.)
(3) LH or LJ operators are limited to 10 complete cycles per hour.
(4) This chart is intended as a guideline only. Doors and balance springs musts be in good operating condition and adjusted to manufacturers specifications.
(5) The chart is based on door travel of approximately 2/3 foot per second. Doors traveling in excess of 2/3 foot per second will require increased HP rating or decreased maximum sq. ft. rating.
(6) High cycle may require upgraded operator. |
< back to top
|
|
