R&S Sectional Doors, Industrial Doors, Pannel Doors, Carriage Doors, Insulated Doors;
Garage Doors
 |
133 South Linden Ave. So San Francisco, CA 94080
phone: 650 873 - 7701 | fax: 650 873 - 7702 | Lic# 708345
|
 |
 |
| |
        
 |
|
|
Sectional Doors
R&S Advantage 24 series commercial sectional doors offers exceptional value and performance.
Please Note -
For residential sectional door installation and service - please contact:
R&S of San Mateo County, Inc.
1540 Gilbreth Rd. Burlingame, CA 94010 phone (650) 552-0660 fax (650) 552-0664
|
|
Insulated Steel - 2 Layer Door | Insulated Steel - 3 Layer Door | Non Insulated Door | Full View Aluminum Door
Insulated Steel - 2 Layer
These economical rib strengthened doors provide energy conservation in industrial, commercial and institutional applications.
 |
- 2" thick
- 1-5/8" thick polystyrene insulation
- Deep rib outside steel skin, galvanized and painted, gauge varies by model
- 10 ball bearing rollers
- Painted steel or vinyl backcover
- Inside security lock
- Tongue and groove joint
|
< back to top
Insulated Steel - 3 Layer
Three layer SANDWICH doors provide a higher R-value and get their stength from “double pn” bonding to an insulation core.
 |
- Tongue and groove joint
- Reinforcing plates for hinge attachment
- Heavy-duty hinges
- Polystyrene or polyurethane foam-in-place core sandwiched between steel skins
- Step plate and lift handle
- Galvanized inside and outside steel skins, gauge varies by model
- Rigid non-corrosive bottom weatherseal retainer
- PVC vinyl bottom weatherseal
|
< back to top
Non Insusated Steel Door
Heavy-duty steel sectional doors for most industrial, commercial and institutional applications.
 |
- Tongue and groove joint
- Deep rib outside steel skin, galvanized and painted, gauge varies by model
- Heavy-duty gauge hinges
- Heavy-duty galvanized steel end stiles
- Step plate
- Aluminum bottom weatherseal retainer
- 10 ball bearing rollers
- PVC vinyl bottom weatherseal
|
< back to top
Full View Aluminum Door
Sectional doors can provide large glazed areas. Especially suited for commercial applications where high visibility and light transmission are important.
 |
- 2-1/8" thick
- Clear anodized aluminum: prepainted white or brown standard finishes
- 3-1/2" enclosed top rails
- Panels secured with butyl tape seal and locking retainer
- Insulated, DSB, plexi, wire or aluminum panel options
- Unique section cap for additional weather protection
- 2-13/16" combined meeting rails
- 3-1/2" wide end stiles
- 3-1/2" enclosed heavy duty bottom rail
- 3-1/2" low temperature vinyl floor seal
|
< back to top
|
|
|
|
|
|
 |
 |