1520 - Card Reader

ProCard

The model 1520 provides users with a full feature single door stand-alone access control system.   The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their own 26-bit access control device.

The 1520 is available in two configurations: with a built-in card reader or as a single door controller only.

Door King Card reader and controller

Features:

• Built-in proximity card reader (available with DKS, AWID or HID reader).
• Built-in clock/calendar.
• Four time zones.
• Four hold open time zones.
• Clock and transaction buffer maintain data for up to 3 days in the event of a power failure.
• Print menu.
• Real time print mode.
• Built-in programming keypad.
• Timed anti-pass back.

Specifications:

• Provides access control for up to 1000 users.
• Memory sizes available: 125, 500, 1000. Specify requirement when ordering.
• Transaction buffer stores last 3600 events.
• 4 hold open time zones.
• Timed anti-pass back (1-59 minutes).
• Print Menu.
• Real time print mode.
• Form "C" dry contact relay.
• EEPROM memory.
• 16 VAC, 20 VA power transformer supplied.

< back to top
< back to models

PROcard is a self-contained access control system built for flexibility, reliability, and ease of use. The stand-alone unit supports up to 2 card readers, 2000 cardholders, and 8 time zones. The unit is programmed using a built-in keypad and audio feedback so a computer is not required. PROcard supports all the major reader technologies including proximity, wiegand, radio frequency, barium ferrite, biometrics, magnetic stripe and keypad. Flexibility comes from a host of features inherent in the system, such as scheduled time zones, anti-passback, automatic door unlock, 65000 ID cardholder range, and a printer output.

Features:

• 2000 Cardholder Capacity
• Two Card Readers Support
• Eight Time Zones
• Bulk Cardholder Entry
• Timed or True Anti-Passback
• Door Open Sensor
• Alarm Shunt Relay
• Vandal Resistant Design
• Real-Time Printer Output
• Non-Volatile Memory to Ensure Database is Retained
• Lightning Protection on Inputs
• Day Light Savings / Leap Year
• AutoLock/Unlock Schedules
• Second Relay Control for Secondary Door

Specifications:

• Capacities:  100, 500, 1000, 2000
• Dimensions: 8" H x 6" W x 3.5" D
• Power:12V (AC or DC)
• Warranty:One Year (extended warranties available)

Touch Card Reader

The Secura Key TOUCH CARD® Reader is designed to integrate into existing access control systems.  Models SK-034 and SK-029 read Secura Key cards. Models SK-028, SK-038 and SK-040 allow many customers to retain their existing Barium Ferrite cards. Output can be factory configured to meet virtually all user specifications. The patented slotless TOUCH CARD® Reader is protected from tampering and hostile environments. The unit is available in surface mount, flush mount, and metal surface mount housings. To order, specify: sk- xxx - y - z - mm - nn (xxx=model number, y=output type, Z=LED control, mm=housing type, nn=data format number).

Features:

• Outputs: Wiegand, Mag Stripe, RS-232 or RS-422
• Patented Slotless Touch Card®   Reader Technology
• Weather and Vandal Resistant
• Inexpensive
• Extremely Easy to Install

< back to top
< back to models

The DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone applications or for connection to an access controller. These vandal resistant keypads (except 1509) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1503 and 1506 series keypads are available in surface or flush mount styles. The 1509 is designed for indoor applications and mounts in a single-gang electrical box. The 1504 model adds an intercom substation to the 1503 or 1506 series allowing voice communication via connection to a master intercom station.

Standard Features on all models:

• Ideal for controlling doors or gates.
• Add or delete individual codes from the keypad.
• "Hold" codes to latch open a door or gate.
• EEPROM Memory.
• LED Lighting (lighted units only).

1503

Features:

• Stores two 4-digit entry codes, two 5-digit entry codes and two 4-digit hold codes.
• Single Form C dry contact relay.
• Operates on 12 to 24 volt AC or DC power.
• Dimensions: 6.25"H x 5.25"W x 4.375"D.
• Dimensions Basic Unit (non-lighted): 5.375"H x 4.5"W x 5.25"D.

< back to top
< back to models

1506

optional flush mount shown

• 4-digit entry code memory: 50, 100, 250, 500, 1000 (select one).
• Six 5-digit entry codes.
• Two Form C dry contact relays.
• Time zone inputs.
• Secondary keypad capability.
• Operates on 16 volt AC power.
• Dimensions: 6.25"H x 5.25"W x 4.375"D.
• Dimensions Flush Mount: 8.375"H x 7.125"W x 4"D.

< back to top
< back to models

1509

• Stores one 4-digit entry code and one 4-digit hold code.
• Single Form C dry contact relay.
• Operates on 12 to 24 volt AC or DC power.
• Mounts into a single-gang electrical box.
• Dimensions: 4"H x 2.875"W.

< back to top
< back to models

8057 Reciever

Specifications:

• Stand-alone receiver.
• Stores up to 16,000 transmitter codes.
• Programming keypad.
• Form C relay.
• 12-24 volt, AC or DC.

8059 Reciever

Specifications:

• Can be used as weigand output or stand-alone receiver.
• Program via learn method.
• Stores up to 80 transmitter codes in stand-alone mode.
• Form C relay.
• In weigand mode, outputs data in 26 or 31 bit formats.
• 12-24 volt, AC or DC.

Transmitters

Specifications:

• 1,000,000 codes available.
• PROXmitters combine RF control with a proximity tag.

Listings:
FCC (US): LSD8059RX
FCC (US): LSD8068T
DOC (CAN): 1736 102 138

Options for RF Controls:
Model 8054 receiver memory: 50, 100, 250, 500, 1000, 1250 – choose one.
Model 8057 receiver memory: 50, 100, 250, 500, 1000, 5000, 16000 - choose one.
Transmitters: 1, 2 or 3 button.
PROXmitters: DKS, AWID or HID proximity tags – specify which.

Accessories Available for RF Controls:
Visor clips
Yagi high gain antenna
Antenna amplifier
Coax antenna kit
Outdoor receiver enclosure
Printer (use with 8054 receiver only)

Sentex

ProKey System

The PROkey System is self-contained, stand-alone keypad for the control of a single door or gate. A four or five digit customized personal identification number is assigned to an individual (or group of individuals) for controlled access. PROkey supports up to 2000 users, 8 time zones, and a pin retry lockout feature. The unit is programmed using a built-in keypad and audio feedback so a computer is not required. Flexibility comes true from a host of features inherent in the system, such as scheduled time zones, automatic door unlock, and a printer output. If you are looking to control access for one door or gate, then the PROkey is the right choice. Features: 2000 Code Entry Capacity Eight Time Zones Strikes & Out (pin retry count) Door Open Sensor Alarm Shunt Relay Real-Time Printer Output Day Light Savings / Leap Year Non-Volatile Memory to Ensure Database is Retained Lightning Protection on Inputs Automatic Door/Gate Unlock Schedule Lighted Housing Specifications: Capacities: 100, 500, 1000, 2000  Dimensions: 8" H x 6" W x 3.5" D 9" H x 7" W x 4.75" D (lighted housing) Power: 12V (AC or DC) Warranty: One Year (extended warranties available)

American Access:

AdvantageDKLP

AdvantageDKE

The AdvantageDKLP line of keyless entry offers a wide selection of post or surface mount models and allows integration with an intercom. All post mount units are housed in heavy metal, powder coated enclosures with a metal keypad.  Also available in the AdvantageDKLP line of keypads is a surface mount "single gang" model, designed for indoor use.

Introduced for the solar gate operator, the DKLP series is designed for the user who has need for a LOW POWER application.  Boasting a power consumption of under 20uA, the AdvantageDKLP line of keypads is the leader in the industry for solar applications.  Available in 50 code configuration, which comes standard with non-volatile memory.

Features:

• Code Capacity: 1, 50 or 100
• Programmable Personal Master Code
• Variable Relay Output Time - 1 - 9 seconds
• Optional Camera (available in intercom models only)
• Audible Tone
• Non-Volatile memory
• Power Consumption: 20uA @ 12VDC in idle mode

< back to top
< back to models

AdvantageDK

The AdvantageDK line of keyless entry offers a post mount model and is also available with a call button and durable 8 ohm speaker, allowing integration with an interior intercom.

AdvantageDK models are stand alone and fully programmable from the keypad.  All post mount models feature a high grade stainless steel faceplate and metal keypad.  They are housed in a heavy metal, powder coated enclosure which will provide years of trouble free entry.

The AdvantageDK line of keyless entry is the most popular model of keypad ever manufactured by American Access Systems. Each unit features a lighted panel with fully programmable independent codes, latch code, sleep code, 3 strikes you're out security, 2 relays and an external event input.

Features:

• Programmable four digit codes: 1000 Code Capacity
• Programmable Personal Master Code
• Programmable Latch Code
• Programmable Sleep Code
• 3 strikes you're out
• External event input
• Two relays w/ variable relay output time: 1 - 99 seconds
• LED indicators and Night Light
• Optional camera (intercom model only

The AdvantageDKE line of keyless entry offers post and surface mount configurations.  All models are stand alone and have 100 fully programmable, four digit codes.

AdvantageDKE post mount models are housed in heavy metal, powder coated enclosures with stainless steel faceplates. A choice of metal or single gang keypad is available, both providing years of trouble free use.

With a 100 code capacity, the 26-100L or 26-100sg keypads are the perfect solution for many low cost installations.

Features:

• 100 programmable four digit codes
• Programmable Master Code
• Programmable Latch Code
• Variable relay output time: 1 - 9 seconds
• Audible Tone
• Non-volatile memory
• Night Light
• Power consumption: 25mA @ 24VDC

AdvantageDKS II

Available in 100, 500, 1000 or 2000 code configurations, the AdvantageDKS II is one of the most cost effective, non PC based controllers available. Each master controller is designed to operate two 26 bit, wiegand output keypads, where all programming and auditing is done from the master station.

The AdvantageDKS II master controllers are available in three configurations: post mount, desk mount or in a raintight enclosure.  Post mount masters (optional intercom available) are housed in heavy metal, powder coated enclosures with stainless steel faceplates and metal keypads. The desk cabinet (interior use only) is enclosed in a black metal housing, while the raintight unit is mounted inside of a standard electrical raintight enclosure.

Each AdvantageDKS II master station allows the user to randomly generate up to 2000, five digit codes and automatically enter them into memory.  These codes can be printed out using an RS-232 serial port printer. The controller will also report time, date, code number entered, relay activated and valid/invalid code.

Features:

• Programmable five digit codes: 2000 code capacity
• Two slave keypad ports, 26 bit wiegand
• Programmable Personal Master Code, Latch Code and Sleep Code
• Split Relay Function allows activation of two separate doors / gates
• Optional Camera (intercom model only)
• 3 strikes you're out
• True Anti Pass Back
• 1000 code transaction buffer